New
SwarfWorks Starlink Cable Pass-Through for SwarfWorks S2 Third Brake Light Housing
$65.00
SW-S2CABLEPASSTHROUGH-A01
Ford F-150
Gen 2
Gen 2 Electronics
Gen 3
Gen 3 Electronics
Pass-through plate replaces one S2 light position and routes the Starlink cable through the brake light housing.Fitment: SwarfWorks third brake light housing with a...
New
SwarfWorks Ford V2 Third Brake Light Hardware Kit
$45.00
SW-TBLHARDWARE-FordV2
Ford F-150
Gen 2
Gen 2 Lighting
Gen 3
Gen 3 Lighting
Replacement hardware kit for the matching SwarfWorks Ford V2 third brake light housing.Fitment: 2015+ Ford F-150 and compatible Raptor with the SwarfWorks Ford V2...
New
SwarfWorks V2 Third Brake Light Installation Plates and Screws
$25.00
SW-V2TBLPlates
Ford F-150
Gen 1
Gen 1 Lighting
Gen 2
Gen 2 Lighting
Gen 3
Gen 3 Lighting
Replacement hardware includes two inner thread plates, two outer plates and four coated mounting screws.Fitment: Compatible SwarfWorks V2 third brake light housing.SwarfWorks part number:...
New
SwarfWorks S2 Block-Off Plate for SwarfWorks Third Brake Light
$5.00
SW-S2DUMMY-1
Ford F-150
Gen 1
Gen 1 Lighting
Gen 2
Gen 2 Lighting
Gen 3
Gen 3 Lighting
Fills an unused auxiliary S2 opening in the SwarfWorks third brake light housing.Fitment: SwarfWorks third brake light housing with a compatible S2 opening.SwarfWorks part...
New
SwarfWorks Starlink Mini Power Cable and 30V Booster for V2 Third Brake Light Mount
$75.00
SW-SLPC-A01
Ford F-150
Gen 2
Gen 2 Electronics
Gen 3
Gen 3 Electronics
Power cable kit includes a 16-foot harness and 12V-to-30V power booster for the compatible Starlink Mini mounting setup.Fitment: SwarfWorks Starlink Mini mount for the...
New
SwarfWorks NMO Antenna Mount Cap
$15.00
SW-NMO-Plastic-CAP
Ford F-150
Gen 1
Gen 1 Electronics
Gen 2
Gen 2 Electronics
Gen 3
Gen 3 Electronics
Protective cap threads onto the NMO base when the antenna is removed.Fitment: Compatible NMO antenna base used with SwarfWorks antenna mounts.SwarfWorks part number: SW-NMO-Plastic-CAP
New
SwarfWorks Dune Flag Conversion Plate for SwarfWorks License Plate Mount
$15.00
SW-DFM-P01
Ford F-150
Gen 1
Gen 1 Body
Gen 2
Gen 2 Body
Gen 3
Gen 3 Body
Replacement conversion plate adapts the matching SwarfWorks plate mount to accept a dune flag. This item is the plate only.Fitment: Compatible SwarfWorks Ford Raptor/F-150...
New
SwarfWorks Wolfbox Camera Adapter for SwarfWorks Ford V2 Third Brake Light
$35.00
SW-3DP-x-WOLF
Ford F-150
Gen 2
Gen 2 Electronics
Gen 3
Gen 3 Electronics
Adapter plate installs a compatible Wolfbox rear camera in the SwarfWorks V2 light. The installer supplies the sealant. Camera sold separately.Fitment: SwarfWorks Ford V2...
New
Sold out
SwarfWorks Overhead Switch Panel Mount for sPOD Bantam Touch – Gen 2 Raptor and F-150
$75.00
SW-SPM-A01-sPOD
Ford F-150
Gen 2
Gen 2 Electronics
3D-printed mount for the sPOD Bantam Touch panel. Replaces the factory overhead sunglasses holder. Switch panel sold separately.Fitment: 2017–2020 Gen 2 Ford F-150 Raptor...
New
SwarfWorks Rear Winch Power Extension Cables – Ford F-150 and Raptor
$199.00
SW-WEC-A01
Ford F-150
Gen 1
Gen 1 Body
Gen 2
Gen 2 Body
Gen 3
Gen 3 Body
Recovery Gear
SwarfWorks cuts and terminates these 1/0-gauge cables for a rear winch installation. The longer current design is intended to replace the original winch leads.Fitment:...
New
SwarfWorks ARB Twin Leader Hose Kit for SwarfWorks Compressor Mount
$75.00
SW-FCMHK-A01
Ford F-150
Gen 3
Gen 3 Body
Recovery Gear
Leader-hose kit connects the ARB Twin compressor to the matching SwarfWorks bracket and includes a stainless-braided hose and fittings.Fitment: ARB Twin compressor with the...
New
SwarfWorks V2 Third Brake Light Replacement Gasket – Ford F-150 and Raptor
$10.00
SW-TLB-Gasket-SW-V2 Ford Gen13-14
Ford F-150
Gen 1
Gen 1 Lighting
Gen 2
Gen 2 Lighting
Gen 3
Gen 3 Lighting
Replacement seal for the compatible SwarfWorks V2 third brake light housing.Fitment: SwarfWorks Ford V2 third brake light. Choose the gasket profile that matches your...
New
SwarfWorks Tow Hook Dune Flag Mount – Ford F-150 and Raptor
$49.95
SW-DFM-A01
Ford F-150
Gen 1
Gen 1 Body
Gen 2
Gen 2 Body
Gen 3
Gen 3 Body
Powder-coated aluminum mount attaches around a factory tow hook and accepts a standard 1/2-inch dune flag. Flag sold separately.Fitment: Ford F-150 and Raptor with...
New
Sold out
SwarfWorks Folding License Plate Mount for Winch Fairleads
$125.00
SW-RRM-A03
Ford F-150
Gen 1
Gen 1 Body
Gen 2
Gen 2 Body
Gen 3
Gen 3 Body
Hinged plate bracket mounts between the fairlead and winch-mount spacers and folds away when you need access to the fairlead.Fitment: Compatible SwarfWorks winch mount...
New
SwarfWorks 11 mm Replacement LEDs for SwarfWorks V2 Third Brake Light
$60.00
SW-TBL-LEDS-11mm
Ford F-150
Gen 1
Gen 1 Lighting
Gen 2
Gen 2 Lighting
Gen 3
Gen 3 Lighting
Replacement set of three 11 mm LEDs for the SwarfWorks third brake light.Fitment: Compatible SwarfWorks third brake light using 11 mm LEDs.SwarfWorks part number:...
New
SwarfWorks Starlink Mini Retrofit Mount With Single NMO – SwarfWorks V2 Third Brake Light
$315.00
SW-SLMTBL-1NMO-A01-Retrofit
Ford F-150
Gen 2
Gen 2 Electronics
Gen 3
Gen 3 Electronics
Retrofit Starlink Mini mount with a driver-side NMO antenna base, fasteners and a 5-meter antenna cable. Retrofit requires drilling and tapping the existing housing....
New
SwarfWorks Hidden Front Winch Mount – 2015–2020 Ford F-150
$549.00
SW-F150WM-A01
Ford F-150
Recovery Gear
Hidden 5/16-inch steel winch mount for a standard 10 by 4.5-inch mounting pattern. Includes the base mounting hardware. Winch and related accessories are sold...
New
SwarfWorks Elite G3.5 Front Light Mount – 2024+ Ford Raptor and Tremor
$599.00
Ford F-150
Gen 3
Gen 3 Lighting
Steel auxiliary light bar with billet aluminum brackets. Attaches to the factory accessory mounting points and accommodates up to four compatible lights. Includes the...
New
SwarfWorks Bedside VHF/UHF Antenna Bracket – Ford F-150 and Raptor
$49.95
Ford F-150
Gen 2
Gen 2 Electronics
Gen 3
Gen 3 Electronics
Powder-coated steel antenna bracket installs behind a factory BoxLink bracket. Choose left or right. Antenna and NMO base sold separately.Fitment: 2015–2024 Ford F-150 and...
New
SwarfWorks V2 Third Brake Light Without Cargo Camera – Gen 2 Raptor, F-150 and Ranger
$519.00
Ford F-150
Ford Ranger
Ford Ranger Lighting
Gen 2
Gen 2 Lighting
Ranger Raptor
Ranger Raptor Lighting
CNC-machined third brake light with replaceable red LEDs and mounting positions for optional S2 lights. Select the integration harness for your vehicle. Auxiliary lighting...
New
SwarfWorks V2 Third Brake Light with Cargo Camera Provision – Gen 3 Raptor and F-150
$519.00
Ford F-150
Gen 3
Gen 3 Lighting
CNC-machined third brake light housing uses the factory cargo camera and a vehicle-specific integration harness. Includes replaceable red LEDs and mounting positions for auxiliary...
New
SwarfWorks Overhead Mount for Diode Dynamics 8-Gang Panel – Ford Raptor, F-150 and Bronco
$75.00
SW-DSWTCH-G3
Bronco
Bronco Electronics
Ford F-150
Gen 3
Gen 3 Electronics
A black 3D-printed overhead bracket for the Diode Dynamics 8-gang switch panel. Replaces the factory sunglasses holder. Switch panel sold separately.Fitment: 2021+ Ford F-150...
New
SwarfWorks V2 Third Brake Light – Gen 1 Raptor and 2009–2014 F-150
$499.00
Ford F-150
Gen 1
Gen 1 Lighting
Third brake light assembly with replaceable red LEDs and provisions for optional S2 auxiliary lights. Includes the vehicle-specific factory wiring integration. Auxiliary lights, antenna...
New
SwarfWorks Tailgate Dust Light Brackets – Ford F-150 and Raptor
$75.00
SW-TGLM-A01
Ford F-150
Gen 2
Gen 2 Lighting
Gen 3
Gen 3 Lighting
Pair of brackets for mounting rear-facing dust or chase lights. Compatible with several cube-style lights, including Baja Designs S1. Lights sold separately.Fitment: Ford F-150...
New
SwarfWorks Overhead Mount for Auxbeam 8-Gang Panel – Gen 3 Raptor and F-150
$75.00
SW-3DP-FG3-AB-DSWTCH
Ford F-150
Gen 3
Gen 3 Electronics
Black 3D-printed mount for the Auxbeam 8-gang switch panel. Replaces the factory sunglasses holder. Switch panel sold separately.Fitment: 2021+ Ford F-150 Raptor and F-150...
New
SwarfWorks Under-Hood Switch-Pros Control Module Bracket – F-150 and Raptor
$45.00
SW-SPUB-F01
Ford F-150
Gen 2
Gen 2 Electronics
Gen 3
Gen 3 Electronics
Mounts the SP-9100 or RCR Force-12 control module under the hood using factory attachment locations. Control module sold separately.Fitment: Gen 2 and Gen 3...
New
SwarfWorks Overhead Switch Panel Mount for SP-9100 – Gen 3 Raptor and F-150
$75.00
SW-3DP-FG3-SPM-x
Ford F-150
Gen 3
Gen 3 Electronics
A black overhead mount for the Switch-Pros SP-9100. Replaces the factory sunglasses holder. Switch panel sold separately.Fitment: 2021+ Ford F-150 Raptor and Ford F-150...
New
SwarfWorks Icom IC-2730 Overhead Console Mount – Gen 3 Raptor and F-150
$75.00
SW-3DP-FG3-IC2730
Ford F-150
Gen 3
Gen 3 Electronics
Carbon-fiber-reinforced 3D-printed mount for the Icom IC-2730 control head. Replaces the factory sunglasses holder and includes mounting screws. Radio sold separately.Fitment: 2021+ Ford F-150...
New
SwarfWorks Icom IC-2730 Overhead Console Mount – Gen 2 Raptor and F-150
$75.00
SW-IC2730G2-A01
Ford F-150
Gen 2
Gen 2 Electronics
Carbon-fiber-reinforced 3D-printed mount for the Icom IC-2730 control head. Replaces the overhead sunglasses holder. Includes mounting screws. Radio sold separately.Fitment: 2017–2020 Ford F-150 Raptor...
New
SwarfWorks Overhead Switch Panel Mount for Auxbeam 8-Gang – Gen 2 Raptor and F-150
$75.00
SW-3DP-FG2-AB-DSWTCH
Ford F-150
Gen 2
Gen 2 Electronics
Black 3D-printed bracket replaces the factory overhead sunglasses holder. Designed for the Auxbeam 8-gang switch panel. Panel sold separately.Fitment: 2017–2020 Ford F-150 Raptor and...
SwarfWorks Front License Plate Relocation Bracket – F-150, Lightning and Tremor
$99.00
SW-LPML-A01
Ford F-150
Relocates the front plate away from the center of the bumper. SwarfWorks specifies the passenger-side tow hook on F-150s with adaptive cruise control.Fitment: 2021+...
SwarfWorks Overhead Switch Panel Mount for Switch-Pros SP-9100 – Gen 2 Raptor and F-150
$75.00
SW-3DP-FG2-SPM-AN
Ford F-150
Gen 2
Gen 2 Electronics
Black 3D-printed mount replaces the factory sunglasses holder and accepts the Switch-Pros SP-9100 panel. Includes the mounting adapter. Controller sold separately.Fitment: 2017–2020 Ford F-150...
SwarfWorks Bedside Dust Light Brackets – Ford F-150 and Raptor
$99.00
SW-BSLM-A01
Ford F-150
Gen 2
Gen 2 Lighting
Gen 3
Gen 3 Lighting
Pair of brackets for rear-facing dust lights. Mounts behind the factory inner-bed tie-down brackets without drilling. Lights sold separately.Fitment: 2015–2024 Ford F-150 and compatible...
SwarfWorks V2 Third Brake Light Integration Harness – Halogen Ford F-150
$35.00
SW-IH-05
Ford F-150
This vehicle-specific integration harness connects the compatible SwarfWorks third brake light to the factory halogen brake-light circuit.Fitment: 2015+ Ford F-150 with a factory halogen...
SwarfWorks V2 Third Brake Light Integration Harness – F-150 Without Cargo Camera
$10.00
SW-IH-04
Ford F-150
Integration harness for connecting a compatible SwarfWorks third brake light to the factory wiring.Fitment: 2015–2020 Ford F-150 non-Raptor without a cargo camera, for the...
SVC Offroad Baja Front Bumper – 2018–2020 Ford F-150
$2,311.00
SVC-F150BAJA-01
Ford F-150
Tight-fitting Baja front bumper with CNC-formed tubing and laser-cut plate. The design accepts a compatible 30-inch light bar. Choose the listed lighting, SVC intercooler...